Before First Use; To Use; Troubleshooting - Beurer KS 19 Manual De Instrucciones

4. Before First Use

1. Pull the clear plastic Battery Isolator Strip out of the Battery Compartment to activate the scale. When
"Lo" appears in the LCD display, the CR2032 battery needs to be replaced.
2. Place the scale on a flat, stable, hard, level surface. Do not place on a soft surface such as on a towel,
placemat, or rug.
3. Touch the "unit" Button repeatedly to cycle through the various
measurement scales to select the desired system: grams (g), ounces (oz),
pounds and ounces (lb:oz), milliliters (ml) or fluid ounces (fl. oz).

5. To Use

Weighing
1. Place the kitchen scale on a solid, level and flat surface.
2. Push the ON/OFF button/TARE button (3) to turn the kitchen scale on.
3. Place the item you want to weigh on the scale. The LCD (2) will show the weight of the item.
Tare
1. First follow the three steps under "Weighing".
2. Briefly push the ON/OFF button/TARE button (3).
3. The LCD (2) will read "0" (0.00 or 0: 0.0) and "TARE" will appear.
4. Add other items you want to weigh to the scale. The LCD (2) will show the weight of the item added.
When removing the added items from the scale, the LCD (2) will read "0" (0.00 or 0: 0.0). When
removing all items, the scale will show a negative value.
Turning the scale off
The kitchen scale will automatically turn off after 120 seconds of non-use to save power.
To shut the scale off manually, press and hold the ON/OFF button/TARE button for about three seconds.

6. Troubleshooting

• If "EEEE" appears in the LCD Display, too much weight has been placed on the scale; only weigh items
up to 11 pounds/5 kg.
• If the LCD display shows (
• If the kitchen scale won't switch on, please make sure to change the battery. If the problem still persists,
please contact customer service.
• If the LCD display reads "unSE", the scale is not positioned level/steady. Please place the scale on a level
surface.
), the battery needs to be replaced.
4