Metrix ScopiX IV OX 9062 Manual De Instrucciones página 94

DISPlay[:WINDow]:TRACe
:XY:XDEFine
DISPlay[:WINDow]:TRACe
:XY:YDEFine
DISPlay[:WINDow]
:TRACe:Y:LABel{[1]|2|3|4}
DISPlay[:WINDow]
:TRACe:Y[:SCALe]
:PDIVision{[1]|2|3|4}
DISPlay[:WINDow]
:TRACe :Y:SPACing
(Command/Query)
The DISP:TRAC:XY:XDEF <INT{1|2|3|4}> command selects the signal positioned on the
X-basis.
To the question DISP:TRAC:XY:XDEF?, the instrument returns the signal used on the
X-basis.
(Command/Query)
The DISP:TRAC:XY:YDEF <INT{1|2|3|4}> command selects the signal positioned on the
Y-basis.
To the question DISP:TRAC:XY:YDEF?, the instrument returns the signal used on the Y-basis.
(Command/Query)
The DISP:TRAC:Y:LAB{[1]|2|3|4} <"label"> command determines the unit of the selected
signal.
The unit is selected among the upper-case letters of the alphabet (A to Z), and is composed of
a name up to 3 letters.
To the question DISP:TRAC:Y:LAB{[1]|2|3|4}?, the instrument returns the unit of the selected
signal.
(Command/Query)
The command DISP:TRAC:Y:PDIV{[1]|2|3|4}<scale|MAX|MIN> command sets the value of
the probe coefficient for the selected signal.
<scale> is a value at NRf format.
To the question DISP:TRAC:Y:PDIV{[1]|2|3|4}?, the instrument returns the value of the probe
coefficient for the selected signal.
(Command/Query)
The DISP:TRAC:Y:SPAC <LOGarithmic|LINear> command specifies the type of scale
applied to the Y-axis.
To the question DISP:TRAC:Y:SPAC?, the instrument returns the type of scale applied to the
Y-axis.
94
Programación