Metrix ScopiX IV OX 9062 Manual De Instrucciones página 99

Programación
MMEMory:CATalog?
MMEMory:CDIR?
MMEMory:DATA
MMEMory:DELete
MMEMory:LOAD:MACRo
MMEMory:LOAD:STATe
MMEMory:LOAD:TRACe
MMEMory:MSIS
(Query)
To the question MMEM:CAT? [<LOCAL|SDCARD>] the device returns the list of files present
in the local memory.
If the file system is not specified, the default file system is used
(see command MMEM:MSIS).
Response format: <file number>, 0[,<file list>]
<file number> is in NR1 format.
<file list> = <"file">,<type>,0
<"file"> consists in a name of 20 letters maximum, followed by a period and the 3-letter
extension.

<type> is STAT for the extension files .CFG

TRAC for the extension files .TRC and .REC

ASC for the extension files .TXT and .FCT

MAC for the extension files .MAC

BIN for all other files
(Command/Query)
The MMEM:CDIR <"directory"> command determines the working directory on the default
device.
To the question MMEM:CDIR? the instrument returns the working directory.
(Command/Query)
The MMEM:DATA <"file">,<block> command transfers a file from the PC to the device.
<"file"> consists in a name of 20 letters maximum, followed by a period and the 3-letter
extension. If the file already exists, it will be overwritten by the new file.
<block> is all of the data in the file preceded by the heading #an, n being the data number and
a, a figure indicating the number of figures making up n.
To the question MMEM:DATA? <"file">, the device transfers the file named to the PC.
Response format: <block> <NL>
(Command)
The MMEM:DEL <"file">[,<LOCAL|SDCARD>] command deletes a file.
If the file system is not specified, the default file system is used (see command MMEM:MSIS
and MMEM:CDIR).
(Command)
The MMEM:STOR:MACR,<"file">,<LOCAL|SDCARD|> command reads a mathematical
function from a ".FCT" file and assigns it to the indicated signal.
If the file system is not specified, the default file system is used (see MMEM:MSIS and
MMEM:CDIR).
<"file"> consists in a name of 20 letters maximum, followed by a period and the FCT extension.
(Command)
The MMEM:LOAD:STAT <"file">[,<LOCAL|SDCARD|FTP>] command reads an instrument
configuration from a ".cfg" file.
If the file system is not specified, the default file system is used (see command MMEM:MSIS
and MMEM:CDIR).
<"file"> consists in a name of 20 letters max., followed by a period and the CFG extension.
(Command)
MMEM:LOAD:TRAC<TRACE>,<"file.trc">[,<LOCAL|SDCARD>] command reads traces
defined in a ".trc" file.
If the file system is not specified, the default file system is used (see command MMEM:MSIS
and MMEM:CDIR).
<"file"> consists in a name of 20 letters maximum, followed by a period and the TRC extension.
(Command/Query)
The MMEM:MSIS<LOCAL|SDCARD>] is used to select the default mass storage support.
To the question MMEM:MSIS? The instrument returns the default mass storage support.
99