Installing Batteries; Function Keys; Using The Scale - Baxtran BAC Manual De Usuario

User's Guide
The electronic BAC baby scale has been designed to help you monitor the growth of your baby, accurately and reliably quantifying how
much milk has been assimilated at each feed.
The TARE function allows you to weight the baby using a soft cloth or towel.
The scale come with a useful WEIGHT-BLOCK function that allows a steady weight to be displayed despite the child wriggling about.
Taking up to 20 kg, and with 10 g divisions, the scales will also help you monitor your child's progress in terms of weight gain during
all stages of growth.
YOU ARE STRONGLY RECOMMENDED TO READ THE INSTRUCTIONS AND WARNINGS HEREIN BE-
FORE USING THE EQUIPMENT AND TO KEEP THE BOOKLET IN A SAFE PLACE.
TIPS FOR USE
Place the scale on a flat and hard surface. A soft and uneven floor (e.g. carpets, linoleum) could cause an alteration to the
weight reading.

INSTALLING BATTERIES

Use four 1.5V alkaline batteries only.
Remove the batteries cover on the underside of the scale.
Insert the batteries ans refit the cover.
Do not throw the batteries away together with your normal domestic rubbish. Take them to a used battery bin.

FUNCTION KEYS

ON/OFF
The ON/OFF key turns the scale on and off.
SELECT UNIT (SEL. UNITA')
Press this key to select the unit of measure you require: kg, lb or oz. These scale has a capacity of 20 kg, division 10 g. After turning
the scale on, display shows 0.00 kg / 0.00 lb /0.00 oz.
HOLD (BLOCK WEIGHT FUNCTION)
Due to the baby moving, the weight shown on the display changes all the time. With the scale switched on, push the button "HOLD"; on
bottom of the display left side you see a black round (2) icon flickering. Lay the baby on the scale and wait a few seconds till weight
indication on the display flickers twice.
The dislpays keeps weight indication for some seconds, then the scale switched off automatically.
TARE
If the baby is laid on a towel or cover, use the TARE function.
Turn the scale on with the ON/OFF/TARE key. The display shows "8888". Wait until the display shows 0.00 kg / 0.00 lb /0.00 oz, then
place the towel or cover on the plate.
Press the ON/OFF/TARE key and wait until the display shows 0.00 kg / 0.00 lb /0.00 oz; the scale is now ready for use.

USING THE SCALE

Press the ON/OFF/TARE key. The display shows "8888". Wait until the display shows 0.00 kg / 0.00 lb /0.00 oz; the scale is now
ready for use. Lay the baby on the plate and wait until the display shows its weight. Press the ON/OFF/TARE key to turn the scale off,
otherwise the scale turn off automatically after 20 seconds without being used.
MAINTENANCE
▪ Take care of your scale, as it a precision instrument. Therefore, avoid exposing to extreme temperatures, damp, knocks, dust and direct
sunlight. Do not drop or knock the scale.
▪ Keep the scale away from sources of heat.
▪ Do not jump on the scale.
▪ Clean the platform with a damp cloth.
▪ Clean the bottom of the scale with just a solt dry cloth.
▪ Never use chemical or abrasive products.
▪ Take care that no liquids penetrate into the scale, as it is not waterproof. Do not leave or use the scale in very damp surroundings,
humidity above 85% or contact with water and other liquids could cause corrosion and effect the precision of the scale.
10
Baby scale Model BAC