Specific Safety Rules - Makita BHP442 Manual De Instrucciones

Ocultar thumbs Ver también para BHP442:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
ENGLISH
1.
Red part
2.
Button
3.
Battery cartridge
4.
Switch trigger
5.
Lamp
6.
Reversing switch lever
7.
Speed change lever
8.
Action mode changing ring
9.
Adjusting ring
SPECIFICATIONS
Capacities
-1
No load speed (min
Blows per minute
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to
hammer drill safety rules. If you use this power tool
unsafely or incorrectly, you can suffer serious
personal injury.
1. Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
4. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
Explanation of general view
10. Graduation
11. Arrow
12. Sleeve
13. Bit holder
14. Bit
15. Groove
16. Screw
17. Hook
18. Blow-out bulb
Model
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
)
Low (1)
High (2)
Low (1)
Net weight
BHP442
6 mm x 75 mm
0 - 1,400
0 - 400
0 - 21,000
0 - 6,000
215 mm
1.9 kg
D.C. 14.4 V
5. Hold the tool firmly with both hands.
ENE039-1
6. Keep hands away from rotating parts.
7. Do not leave the tool running. Operate the tool
only when hand-held.
8. Do not touch the bit or the workpiece immediately
after operation; they may be extremely hot and
GEB003-4
could burn your skin.
9. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
19. Limit mark
20. Rear cover
21. Screws
22. Recessed part
23. Spring
24. Arm
25. Carbon brush cap
26. Hole
13 mm
13 mm
38 mm
M6
BHP452
10 mm x 89 mm
M6
0 - 1,500
0 - 400
0 - 22,500
0 - 6,000
215 mm
1.8 kg
D.C. 18 V
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bhp452

Tabla de contenido