Haier HMV1472BHS Instrucciones De Instalación página 21

Before Rotation
5. Gently remove the wires from the grooves. Reroute the wires through grooves
on other side of the blower unit.
Before Rerouting
a
6. Roll the blower unit 90° so that fan blade openings are facing out the back of the
microwave.
Before Rolling
7. Using tin snips, remove the knockout plates in the back of the unit.
8. Place the blower unit back into the microwave.
IMPORTANT:
•
Make sure the wires are not pinched and that they are properly secured.
•
The blower unit exhaust openings should match exhaust openings on
the rear of the microwave oven.
After Rotation
a
After Rerouting
a
After Rolling
a
19
Back of Microwave
A
a
Grooves
A
Back of Microwave
A
a
Knockout Plates
A
a