Moving The Range - Whirlpool WFE775H0HB Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Install anti-tip bracket to floor or wall per installation
instructions.
Slide range back so rear range foot is engaged in the
slot of the anti-tip bracket.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed
and engaged.
Failure to follow these instructions can result in death
or serious burns to children and adults.
When moving range, slide range onto cardboard or hardboard to
avoid damaging the floor covering.
If removing the range is necessary for cleaning or maintenance:
For power supply cord-connected ranges:
1. Slide range forward.
2. Unplug the power supply cord.
3. Complete cleaning or maintenance.
4. Plug in power supply cord.
5. Check that the anti-tip bracket is installed and engaged.
See the "Verify Anti-Tip Bracket Is Installed and Engaged"
section.
6. Check that range is level.
16

Moving the Range

For direct-wired ranges:
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Disconnect power.
2. Slide range forward.
3. Complete cleaning or maintenance.
4. Check that the anti-tip bracket is installed and engaged.
See the "Verify Anti-Tip Bracket Is Installed and Engaged"
section.
5. Check that range is level.
6. Reconnect power.
WARNING
Electrical Shock Hazard

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wfe775h0hwWfe975h0hvWfe975h0hzWfe775h0hz

Tabla de contenido