CASUALPLAY Prima easy Instrucciones De Uso página 20

your baby (fig.13). Bear in mind the baby's weight when choosing the position of
the backrest in the vehicle.
Positions in the vehicle (fig. 14):
Lying down: up to 5 Kg. weight.
Intermediate 1: to 5 kg in weight with or without basis Prima fix.
Intermediate 2: 5 -10 Kg with or without basis Prima fix.
Sitting: from 5 Kg. up to 10 Kg. weight.
NOTE: Out of the vehicle you can choose any position up to 9 Kg.
Fitting and removing the hood (see illustrations 15 - 16)
• Fit the hood inserting the ends of both sides in the slots on the sides of the frame
(fig. 15).
• Position the slots of the hood leaving the upper belt guides uncovered. Fasten the
side buckles to the foot cover (fig. 16).
• Remove the hood by following the instructions in reverse order.
Removing the upholstery (see illustrations 17 - 23)
• Remove the foot cover, undoing the buckles and releasing the hooks on the sides
of the frame (fig.17 - 19).
• Remove the hood.
• Open the fastening buckle. Remove the chest protectors and the baby cushion
pad (fig. 20).
• Pass the harness straps through the upholstery slots (fig. 21).
• Remove all the upholstery from the edges starting with the lower part, paying
special attention to the part that covers the TMS (fig. 22). Lastly, release the
upholstery upper hook on the frame (fig. 23).
UNISYSTEM (see illustrations 24 - 26)
• This exclusive fastener system means that the Prima Easy can be used with the
following strollers: Vintage, Vintage 2, Vintage 3 Downtown, S4, S4 Reverse,
Jazz
Fitting the PRIMA on the pushchair (see illustrations 24 - 25)
• Put the parking brake on (fig. 24).
• Place the Prima on the pushchair facing backwards. Line the UNISYSTEM
connectors up with the slots. Press downwards until it clicks indicating that
it is fastened, (fig. 25) and a green signal appears in the side window of the
couplings.
Removing the PRIMA (see illustration 26)
• Press and then release the red button on both couplings (fig. 26) (the red signal
will appear in the window) and pull upwards to release it from the chassis.
WARNING: Check that the fastening devices of the Prima and the pushchair are
correctly activated before use.
18