Urrea UD85 Manual De Usuario Y Garantía página 34

E N G L I S H
21.
Be extremely careful when making high-
voltage measurements; DO NOT TOUCH
TERMINALS OR TEST LEAD PROBE ENDS.
22. (Volts, Ohms, Diode
Test, Frequency, Capacitance and
Temperature input Terminal).
The red test lead is plugged into this
terminal for all AC V, DC V, Ohms, continuity
test, diode test, frequency and capacitance
functions. When measuring temperature, a
thermocouple adapter is plugged into both
this terminal and the COM input terminal.
23.
To avoid electrical shock or instrument
damage, do not connect the COM input
terminal to any source of more than 600V
with respect to earth/ ground.
24. COM (Common Terminal).
The black test lead is plugged into this
terminal for all measurements. When
measuring temperature, a thermocouple
adapter is plugged into this terminal.
34
25. AC.
Displayed when AC measurement function
is selected.
26. (Negative Polarity).
Automatically indicate negative inputs.
27. AT.
Displayed when the Auto Range mode is
selected.
28. (Overload Indication).
Displayed on the LCD when input value is
too large to display.
29. (Low Battery).
Battery life warning. When
turned on, at least 8 hours of battery life
remain. Replace the battery immediately.
Never leave a weak or dead battery in the
Meter. Even leak-proof types can leak and
damage the Meter.
30.
Displayed when the Meter is in the
continuity test function.
31.
Displayed when the Meter is in the
continuity test function.
32. MAX (Maximum Value in the
Recording mode).
The value displayed is the maximum reading
taken since the Recording mode was
entered.
33. MIN (Minimum Value in the
Recording mode).
The value displayed is the minimum reading
taken since the Recording mode was
entered.
is first