Cleaning And Care; Descaling - Unold 18510 Instrucciones De Uso

13. Please allow the product to cool
down for a certain time before
using the kettle again to heat
water.
14. The kettle is fitted with a dry-
operation cutout that switches off
the heating elements when they
become too hot, for instance when
the kettle has boiled dry. Allow
the kettle to cool down. Then fill
the kettle with cold water. This
will reset the cutout so that the
kettle can be used again.

CLEANING AND CARE

Before cleaning, always turn
off the appliance and unplug it
from the power supply.
Allow the appliance to cool
before cleaning it.
1. Do not immerse the base, power
cord or kettle in water or other
liquids or wash them in the dish-
washer.

DESCALING

1. To keep the appliance operating
efficiently and to prolong its ser-
vice life, it should be descaled
regularly, depending on the hard-
ness of your water.
2. The lime scale filter has to be
cleaned regularly. Please empty
the kettle completely and allow
it to cool off. Carefully remove
the filter from the pour spout.
Clean the filter carefully with a
soft brush under running water.
Copyright UNOLD AG | www.unold.de
15. Always use fresh and cold water.
Do not leave water in the kettle.
16. Switch off and unplug electrical
appliances after use.
Boiling
scalding. Therefore, please
handle the appliance with care
when it contains hot water.
The appliance becomes very
hot during
maintains the heat during
some time after disconnection.
2. Wipe off the base and the kettle
with a damp cloth and a little
dishwashing detergent. Do not
use any abrasive scouring agents,
steel wool, metal objects, hot
cleaning agents or disinfectants,
since they can damage the appli-
ance.
3. The appliance must be comple-
tely dry on the outside before you
use it again.
water can cause
operation and
You can also
place the filter
in a bowl with a
descaling solu-
tion. Then rinse
the filter with
clear water and
insert it in the
pour spout.
3. Use off-the-
shelf desca-
ling products
17