Tabla de contenido
Publicidad
Operation
Display
Normal operation
Id.1: The characters Id.1
appear when the system is
connected to the power supply.
The three digit code of the
system configuration appears
after a short time, e.g.:
031:
These digits identify the system
configuration recognised by
the system. Shortly after this
display, the units which can be
operated are shown with the
LCD background lighting on.
A flashing dot is then
shown within the system
components which can be
used:
The system is now in "Sleep
status" [OFF]. Button lights,
display lights and the whole
system are switched off. Press
any button to restore "Stand-
by" status.
30
Lighting
On/Off
Hot water temperature
above 42 °C
«Mode button»
Lower temperature (–)
Higher temperature (+)
Overhead shower
Body showers
Hydromassage
Hand shower
Publicidad
Tabla de contenido
