Before Initial Use - Dometic FreshWell3000 Instrucciones De Uso

Dometic FreshWell3000
7

Before initial use

Inspection before starting up
Before you switch on the under-bench air conditioner, observe the following:
➤ Check whether the supply voltage and frequency correspond to the
values specified in the technical data, see page 33.
➤ Ensure both the air intake opening and the air nozzles are free. All venti-
lation grilles must always be kept free to ensure that the under-bench air
conditioner is able to operate at maximum capacity.
!
CAUTION! Beware of injury
Do not insert your fingers or objects into the air nozzles or the
intake grille.
Check remote control and insert batteries
➤ Insert the provided batteries in the remote control battery compartment,
see chapter "Replacing the remote control batteries" on page 26.
➤ Check that the four Dip switches (fig. 4 1, page 4) are in the correct
position.
➤ If you changed the position of the Dip switches:
Acknowledge the new setting using the Reset button (fig. 3 11, page 4).
Setting the time
➤ Set the current time: see chapter "Setting the time" on page 26.
EN
Before initial use
19