Inserting/Replacing The Batteries - Bosch WEU PLR 30 C Manual Original

OBJ_BUCH-2312-004.book Page 25 Tuesday, November 8, 2016 4:12 PM
Display Elements
a Status Bluetooth®
Bluetooth® activated, no connection established
Bluetooth® activated, connection established
b Battery indicator
c Reading
d Result
e Laser switched on
f Measurement reference level
g Measuring functions
Length measurement
Continuous measurement
Surface measurement
Volume measurement
h Error message "Error"
Assembly

Inserting/Replacing the Batteries

Using alkali-manganese or rechargeable batteries is recommended for operation of
the measuring tool.
Less measurements are possible when using 1.2 V rechargeable batteries than with
1.5 V batteries.
To open the battery lid 9, press the latch 10 in the direction of the arrow and remove
the battery lid. Insert the batteries/rechargeable batteries. When inserting, pay atten-
tion to the correct polarity according to the representation on the inside of the battery
compartment.
If the battery symbol first appears in the display, then at least 100 measurements
are still possible. When the battery symbol is empty, you have to replace the batter-
ies/rechargeable batteries because measurements are no longer possible.
Always replace all batteries/rechargeable batteries at the same time. Do not use dif-
ferent brands or types of batteries/rechargeable batteries together.
 Remove the batteries/rechargeable batteries from the measuring tool when
not using it for longer periods. When storing for longer periods, the batteries/re-
chargeable batteries can corrode and self-discharge.
Bosch Power Tools
English | 25
1 609 92A 27L | (8.11.16)