Bestron A1400S Manual Del Usuario página 20

5. The appliance is now ready for use. You can move the
vacuum cleaner while you are cleaning by pulling on the
hose grip. You can lift the appliance with the vacuum
cleaner's handle.
If so required, you can also reduce the suction quickly by
moving the slide on the hose grip.
Accessoiries
This vacuum cleaner is supplied with one combined accessory:
• a crevice tool with a narrow nozzle, which you can use to clean radiators,
window frames, crevices, small openings, and similar
• a dusting brush, which you can use to clean delicate or irregular surfaces, furniture,
Venetian blinds, and similar.
oPArAtion - storage after use
1. Remove the plug from the wall socket.
2. Wrap the power cord around the hooks on the appliance.
cleAninG And MAintenAnce - cleaning the housing
1. Remove the plug from the wall socket.
2. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics.
3. Over the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the
wheels from turning easily. Consequently they should be kept clean.
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
cleAninG And MAintenAnce - removing waste from the dust receptacle
1. Remove the plug from the wall socket.
2. Remove the dust container by the pressing
the release button (see Figure 8) and take
the dust collector out.
3. Remove the dust receptacle by pressing the
release button on the dust receptacle
(see Figure 8) and pulling on the receptacle.
4. Empty the dust receptacle in a dustbin
(see Figure 9).
5. Fit the dust receptacle onto the appliance,
and click it into position.
Figure 5 On/Off switch
Figure 7 Storing the vacuum cleaner
Figure 8 Removing waste from the dust receptacle
20
user's instructions
Figure 6
Figure 9