GENDEX Oralix AC Manual Del Usuario página 29

Table 206 - Recommended separation distances between portable and mobile RF communications
portable and mobile RF communications equipment and the Gendex Oralix AC
The Gendex Oralix AC is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the Gendex Oralix AC can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the Gendex Oralix AC as recommended below, according to
the maximum output power of the communications equipment.
Rated maximum output
power
of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d
in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is
the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
equipment and the Gendex Oralix AC
Recommended separation distances between
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d 1 2 , P
0,12
0,38
1,2
3,8
12
Printed on: 22 Mär 2012, 09:22:12 am; Printed by: TOBIAS BAUER
GENDEX
m
80 MHz to 800 MHz
d 1 2 , P
0,12
0,38
1,2
3,8
12
25
800 MHz to 2,5 GHz
d 2 3 , P
0,23
0,78
2,3
7,3
23
Oralix AC