Toro CUSTOM COMMAND CONTROLLER Serie Guía De Usuario página 16

To set a watering day schedule for each program:
1. Turn the function dial to the
display will show the current watering day schedule for the
selected program.
2. Select Program
3. Set the watering day(s) for the program using one of the three
following procedures: Days of the Week, Odd Days/Even Days or
Day Interval scheduling procedure.
4. Repeat steps 2 and 3 as necessary to set a watering day schedule
for each program.
Days of the Week
. Press the
A
. Press the
B
. To select the day, press the
C
. Press the
D
. Repeat steps
E
Odd Days or Even Days
. Press the
A
. Press the
B
Day Interval
. Press the
A
. Press the
B
. Press the
C
Programming the Controller
14
, ,
A B C
button until the weekday abbreviations are
NEXT
shown at the top of the display.
button.
ON
from the schedule, press the
button to select the next day.
NEXT
and
C
button until
NEXT
displayed.
button to select the schedule.
ON
Optional: To remove selected days of the week from the
Odd/Even watering schedule:
. Press the
1
NEXT
flashing.
. Press the button to exclude the day from the schedule.
2 OFF
(Press the button to restore the day to the schedule.)
ON
button until the
NEXT
displayed.
button to select this option.
ON
button. The display shows the current Day
NEXT
Interval number (1–30).
Watering Days
or with the
D Program
(Sunday) will begin flashing.
SUN
button. To remove the day
ON
button.
OFF
to set the remaining days of the week.
D
ODD DAYS
button until the selected day begins
DAY INTERVAL
position. The
switch.
or is
EVEN DAYS
option is