Whirlpool LWFR3100 Instructivo De Instalación, Uso Y Manejo página 43

Problem
Burners do not
work
Burner flames are
uneven, yellow
and / or noisy
The burner
makes popping
The spark plug
does not trigger
Excessive heat
around cookware
on cooktop
The oven does
not work or does
not light
The oven burner
flames are
uneven, yellow
and / or noisy
The oven
temperature is
too high or too
low
Check out
If there is gas in your home, check
if other gas appliances that use
work
If clogged burner orifice
If you are properly positioned the
burner caps
Type of gas being used at home
(LP Gas).
That is not the burner wet or cap.
The heater is connected to a
power source
There sparking and will not turn
The size of the cooking utensil
Cooking time and temperature
selected
Type of gas being used at home
(LP Gas)
The heater is connected to a
power source
The activation of the knob.
Type of gas being used at home
(LP Gas).
The calibration setting oven
temperature.
Solution
Call your gas supplier
Remove the burners and See the
operating instructions of burners.
Check burner operation section.
If not using LP gas, the conversion
must be made, contact an
authorized service technician.
Let it dry
Connect to properly grounded
power
Call an authorized service
Check the location and size of
pan.
See recipe and preheat schedule.
If not using LP gas, the conversion
must be made, contact an
authorized service technician.
Connect to a properly grounded
See the operation section of oven
If not using LP gas, the conversion
must be made, contact an
authorized service technician.
See the section "Adjust oven
burner flame."
43