TP-Link TL-PA9020 Guía De Instalación Rápida página 9

If you have more than 2 powerline devices, repeat the steps below on each additional
devices to be configured:
1 Press the Pair button for 1
second on any powerline
device in the secure network.
Secure Network
A
Blinking
FAQ (Frequently Asked Questions)
Q1. How do I reset my powerline adapter?
A1. With the powerline adapter plugged into to the electrical outlet, press and hold the
Pair button until the Power LED
A2. Use the tpPLC Utility to reset the powerline adapter.
2 Within 2 minutes, press the
Pair button for 1 second on the
additional powerline device.
B
Blinking
goes off momentarily and comes back on.
3 Done.
C
English
On
7