JB Systems Light ILEAD CONTROLLER Manual De Instrucciones página 5

ENGLISH
HOW TO USE
You can easily control pan, tilt, shutter, gobo, color, rotation, dimmer and focus functions on the lighting
fixtures by pressing the relevant buttons showing on the control panel. With the use of joystick/ sliders,
you will be able to quickly set the fixtures' Pan or Tilt position to make scenes. You can then save all
these scenes step by step in a memory to create a chase (show). The controller allows you to program
24 chases with 485 programmable scenes maximum.
PROGRAM MODE
When power is turned on, the controller enters Programming mode automatically.
The LED above this button lights off indicating Program mode in active.
BLACKOUT MODE
Press the BLACKOUT/STAND ALONE button, the LED above this button lights up
indicating Blackout in active.
STAND ALONE MODE
Hold on the BLACKOUT/STAND ALONE for 3 seconds, the LED above this button
will blink indicating Stand-Alone mode in active.
The Stand Alone 1 and Stand Alone 2 are designed for iSolution lighting fixtures
in Stand Alone ( Master/ Slave ) mode.
Stand By: To blackout the lighting fixtures.
Mode selection: Different run modes, e.g. fast / slow, audio / manual / auto,
position, latch, etc., correspond to different functions.
Function selection: Implements a wide variety of effects, like strobe, X/Y moving
pattern selection, gobo/ color changing, X/Y position setting, dimmer, etc. Functions
vary with different fixtures.
Different lights have different modes and different functions, which can be triggered
by Stand Alone mode. Please refer to each lighting fixture's user manual for more
details.
JB SYSTEMS
®
OPERATION MANUAL
5/71 iLEAD Controller
ENGLISH
REMOTELY SET DMX ADDRESS
 Hold on the BLACKOUT/STAND ALONE button for 3 seconds to enter Stand-
Alone mode.
 Hold down the SCANNERS button and then press BLACKOUT/ STAND
ALONE button. You will see the pan & tilt of all the fixtures in the chain stopping
at the central position. The shutter & LED of the first fixture will open/ blink
indicating the fixture is active, ready to be designated a new position ( the
number in the chain ).
 If you have two chains in the venue, you can jog ( push ) joystick Left/Right to
select chain 1 or chain 2, and jog joystick Up / Down to select next fixture or last
fixture.
 Select 1~12 button to set DMX address.
 Press SCANNERS to next page to select 13~24 button for setting DMX address.
 Press the BLACKOUT/STAND ALONE button again to return to the program
mode.
Fixtures No. 1 2 3 4
DMX channel for
1 9 17 25
Moving Head
Scanner
Barrel
Color changer 3 11 19 27
Multi-Gobo
projector
Fixtures No. 13 14 15 16
DMX channel for 97 105 113 121
Moving Head
Scanner
Barrel
Color changer 99 107 115 123
Multi-gobo
projector
JB SYSTEMS
®
OPERATION MANUAL
5 6 7 8 9 10 11
33 41 49 57 65 73 81
35 43 51 59 67 75 83
17 18 19 20 21 22 23
129 137 145 155 161 169 177
131 139 147 157 163 171 179
6/71 iLEAD Controller
12
89
91
24
185
187