JB Systems Light ILEAD CONTROLLER Manual De Instrucciones página 9

ENGLISH
CLEAR ALL MEMORY
1. Press the BLACKOUT/STAND ALONE for 3 seconds, into Stand-Alone
mode.
2. Hold down the MEMORY button and then press BLACKOUT / STAND
ALONE button, all memory will be deleted.
LIGHT SHOW
1. Press LIGHT SHOW button. The LIGHT SHOW LED will light up, indicating
light show mode is active.
2. Press AUTO/SOUND/MIDI to activate Auto, Sound or MIDI mode. The LEDs
indicate which mode is activated.
3. Press the button ( 1 ~ 24 ) to run a desired lighting show.
When in Auto mode, you can set the light speed and fade time by using the sliders. These settings will
be kept when next time you run the same light show. When in Sound mode activation, the Light show
will be triggered by music, however, you can still set the fade time of the light show.
OVERRIDE CONTROL
When running light shows, you can press the Override button to control the
fixture manually, the LED lights up indicating Override function is activated.
Press "Scanners" button to select the fixtures you want to override.
MIDI OPERATION
You can run a chase, set speed and fade time, light show auto or sound, and blackout using MIDI
commands, This allows you to pre-program a light show to match a sequenced backing track. You
cannot perform live head control or programming functions by MIDI.
The controller will only respond to MIDI commands on the MIDI channel which it is set to full stop. All
MIDI control is performed using Note on commands. All other MIDI instructions are ignored. To stop a
chase, send the blackout on note.
When programming a MIDI controlled sequence, you should always start by sending a page command,
as you don't know what the current page setting will be on the controller.
When you recall a chase by MIDI, the chase will run at its programmed speed, fade and sound
activation settings. If you want to change the speed, fade and sound activation by MIDI command you
need to do this after you have started the chase. The speed, fade and sound setting which you set by
MIDI will not be remembered as part of the chase.
JB SYSTEMS 13/71
®
OPERATION MANUAL
iLEAD Controller
ENGLISH
MIDI note Note name
36 C3
37 C#3
38 D3
39 D#3
40 E3
41 F3
42 F#3
43 G3
48 C4
49 C#4
50 D4
51 D#4
52 E4
53 F4
54 F#4
55 G4
56 G#4
57 A4
58 A#4
59 B4
60 C5
61 C#5
62 D5
63 D#5
74 D6
75 D#6
76 E6
77 F6
78 F#6
79 G6
MAINTENANCE
The unit should be cleaned regularly using a wet cloth. We recommend internal cleaning to be carried
out by qualified personnel.
SPECIFICATIONS
Power Input: DC 9-12V 300 mA min
DMX Input: 3 pin male XLR
DMX Output: 3 pin female XLR
Stand Alone: 5 pin male XLR
MIDI Signal: 5 pin standard interface
Audio Input: By built-in microphone or line in
Dimensions: 485 x 135 x 80 mm
Weight: 2.5 kg
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com
JB SYSTEMS 14/71
®
OPERATION MANUAL
Function
Chase 1
Chase 2
Chase 3
Chase 4
Chase 5
Chase 6
Chase 7
Chase 8
Chase 9
Chase 10
Chase 11
Chase 12
Chase 13
Chase 14
Chase 15
Chase 16
Chase 17
Chase 18
Chase 19
Chase 20
Chase 21
Chase 22
Chase 23
Chase 24
SPEED
X-FADE
AUTO MODE
SOUND MODE
BLACKOUT ON
BLACKOUT OFF
iLEAD Controller