Appendix
Additional information
Specifications
Power source ............................. 14.4 V DC (10.8 V to 15.1 V
Grounding system ................... Negative type
Current consumption ............ 23 A (at continuous power,
Average current consumption
..................................................... 6.4 A (4 W for two channels)
Fuse ................................................ 30 A
Dimensions (W × H × D) ... 255 mm × 50 mm ×
Weight .......................................... 1.6 kg
Maximum power output ....... 250 W × 2 (at 14.4 V, 4 W,
Continuous power output ... 125 W × 2 (at 14.4 V, 4 W,
Load impedance ...................... 4 W (2 W to 8 W allowable)
Frequency response ............... 10 Hz to 30 kHz (+0 dB,
Signal-to-noise ratio ............... 105 dB (IEC-A network)
Distortion ..................................... 0.004 % (4 W, 1 kHz)
Separation .................................. 70 dB (10 W, 1 kHz)
Gain control ............................... 400 mV to 6.5 V
Maximum input level / impedance:
RCA ...................................... 6.5 V / 22 kW
Notes
! Specifications and the design are subject to
modifications without notice.
! The average current drawn is nearly the maxi-
mum current drawn by this unit when an
audio signal is input. Use this value when
working out total current drawn by multiple
power amplifiers.
12
En
allowable)
4 W)
4.1 A (4 W for one channel)
8 A (2 W for two channels)
104 mm
2 ch) / 600 W × 1 (at 14.4 V,
4 W, 1 ch BRIDGE)
20 Hz to 20 kHz, ≦ 0.8 %
THD)
300 W × 1 (at 14.4 V, 4 W
BRIDGE 1 kHz, ≦ 0.8 % THD)
150 W × 2 (at 14.4 V, 2 W,
1 kHz, ≦ 0.8 % THD)
–3 dB)
65 dB (10 W, 100 Hz to
10 kHz)