Technical Specifications - Hudora Stadion Instrucciones De Montaje Y De Uso

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral com-
ponent of the product. Therefore, please store them and the packaging carefully
in case questions arise in the future. Please always include these instructions
when handing on the product to a third party. This product must be assembled
by an adult. This product is designed for private/domestic use only. This product
is not designed for commercial/industrial use. The use of the product requires
certain capabilities and skills. Always adjust according to the age of the user and
use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Stadion football goal
Item number: 76909
Dimensions when assembled: 300 x 160 x 90 cm
Purpose: Soccer goal for versatile shooting and goalkee-
per training.
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/service/.
CONTENTS
16 Goalposts
1 Goal net
7 Tent pegs (for stand fixing)
4 Screws A with 4 washers
6 Screws B with 6 washers
2 Screws C with 2 washers
4 Screws D with 8 washers and 4 nuts
2 Cords
1 Manual
Other items included are meant to facilitate safe transportation and are not re-
quired for the installation and use of the product.
SAFETY INSTRUCTIONS
• WARNING! Not suitable for children under 36 months. Long cord. Strangula-
tion hazard.
• Prior to use, check all parts of the goal for damages and correct assembly.
In this regard, it is important to check the connecting elements and screw
connection for stability and fit. Any sharp edges that might have formed must
immediately be removed!
• Warning: do not climb on the goal frame or net or hang from the goal posts.
There is a serious risk of injury!
• Children should only use the product when they are under adult supervision.
• No liability is assumed for damages resulting from incorrect application of the
instruction manual.
INSTRUCTIONS ON ASSEMBLY
Notice: The product must be assembled by 2 adults. Lubricate the connection
assemblies on the narrow ends a bit before starting the assembly. That facili-
tates the assembly and extends the durability of the product!
1. Assembling the goalpost frame and net
First assemble all the round pipes (5-10) as shown in Illus. 1. Make sure that you
use the right numbered pipes. Now screw in the left and right posts (3 and 4)
together and pull the straps of the goal net over them. Tighten the four-cornered
rods 1 and 2 together and push them through the other goal net straps. While
doing so, it is important that the net has already been pulled back over the
positioned rods 5a/5b and 6. The net should be towards the outer side before
fastening the door batten. Fasten the batten, post and the remaining goalpost
together. (See Illus. 2) Finally, fasten the goal net on the lower part of the goal
frame by threading the cords as indicated in fig. 3 around the tubes and knot
the loose ends.
All images are examples of the design.
2. Stand locking of the goal
Finally fix the goal frame by means of the pegs on the ground. Ascertain that the
ground is suitable for the application of pegs (e.g. no water pipes for sprinkler
devices!). Make sure that the pegs are completely driven into the ground and
have firm position. Avoid protruding fastenings (risk of stumbling). On too hard
grounds the goal must be saved by appropriate measures in another way against
overturning in order to prevent risk of injuries (e.g. with slabs or sandbags). Ne-
ver play with an unsecured goal or never leave the goal unsecured respectively.
USAGE INSTRUCTIONS
• Only set up the goal on level ground.
• Please keep a minimum distance of at least 3 m to any surrounding obsta-
cles.
• Secure the goal to keep it from toppling over – even if not in use.
• Avoid exposing the product unnecessarily to bad weather conditions. Keep it
in a cool and dry storage area.
• Check for any rust on the product and remove it immediately. Pushing toge-
ther the metal parts could lead to the protective layer being scratched and
rust developing.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and
after each use. Do not make any structural changes. For your own safety, please
use original spare parts only. These can be sourced from HUDORA. If parts be-
come damaged or if sharp edges or corners should develop, the product may not
be used any more. If in any doubt, please contact our service team (http://www.
hudora.de/service/). Store the product in a safe place where it is protected from
the elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. You can find numerous information
on the product, replacement parts, solutions to problems and lost assembly
manuals at http://www.hudora.de/service/.
4/8