Olimpia splendid PELER 4 Instrucciones De Uso página 22

Ocultar thumbs Ver también para PELER 4:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Please pay attention when adding water to:
Unplug the appliance
Before refilling, remove any remaining water
Use only clean water
Fill the water tank slowly
Pay attention to the front water level display window to not exceed the maximum level.
Lock the tank with the slider pin, to prevent the tank falling
POWER button
1. Connect the plug into the power outlet, a beep tone will be heard.
2. Press the POWER button, the FAN indicator and HIGH speed indicator will turn on with
beep tone. The unit will operate in the strongest air of normal mode.
3. Press it again to shut off, the unit stops.
MODE button
Press the mode button to switch between the different functions SLEEP, NATURE and FAN
Note: do not adjust the direction the wind to the human body.
HIGH speed + SLEEP mode
With the fan speed set to high, select SLEEP mode. Both indicators HIGH and SLEEP will come on. The air
speed will change automatically as follows: high and medium during the first half hour, medium and low during
the second half hour, low and off for the remainder of the time.
MED speed + SLEEP mode
With the fan speed set to medium, select SLEEP mode. Both indicators MED and SLEEP will come on. The
air speed will change automatically as follows: medium and low during the first half hour, low and off for the
remainder of the time.
LOW speed + SLEEP mode
With the fan speed set to low, select SLEEP mode. Both indicators LOW and SLEEP will come on. The air
speed will change automatically as follows: low and off for the whole time.
HIGH speed + NATURE mode
With the fan speed set to high, select NATURE mode. Both indicators HIGH and NATURE will come on. The
air speed will change automatically as follows: high, medium and low, alternately.
MED speed + NATURE mode
With the fan speed set to medium, select NATURE mode. Both indicators MED and NATURE will come
on. The air speed will change automatically as follows: medium and low, alternately.
LOW speed + NATURE mode
With the fan speed set to low, select NATURE mode. Both indicators LOW and NATURE will come on.
The air speed will change automatically as follows: medium and low, alternately.
22
OPERATING INSTRUCTIONS

Publicidad

Tabla de contenido
loading

Tabla de contenido