Olimpia splendid PELER 4 Instrucciones De Uso página 23

Fan speed button
1. When the On button is pressed, the HIGH speed indicator comes on and air is circulated
at maximum speed.
2. Press the speed button once, the MED speed indicator comes on and air is circulated at
medium speed.
3. Press the speed button once more, the LOW speed indicator comes on and air is circulated
at low speed.
SWING button
Press SWING button to turn oscillation function on or off.
TIMER button
1. Press the TIMER button to adjust timer setting. Every press adds 30 minutes up to 7.5
hours. The set period is indicated on the display.
2. To clear timer mode, press TIMER button 16 times (one more press after reaching 7.5
hours); the TIMER indicator will be off.
COOL button
1. Press the COOL button. If there is enough water, the COOL indicator comes on and the
pump starts working.
2. After approx. 3 minutes humid air will begin to circulate.
3. Press the COOL button once more to switch off the function.
Note:
1. If press the COOL button when water is under minimum level or no water, the alarm will
sound after 90 seconds, and COOL indicator will continue to blink about 10 seconds. After
10 seconds, the alarm sound stops and COOL indicator will also turn off.
2. The unit can be used without water as normal electrical fan. In this situation, the COOL
button must be switched off.
ION button
Press the ION button, the ION indicator will be on and the ionizer will start to work, the ne-
gative ion will come out with the wind blowing.
NOTE
- At first use, the appliance may have a slight odor
- At each re-starting, the appliance may have water condensate on the grid
Each time the unit is switched on, a few drops of water may spray out along with the air jet
and condensation may form on the grill.
23
PELER 4