Monitor Description; Proper Use; Technical Description; Installing The Monitor - Waeco PerfectView CRT245 Instrucciones De Montaje Y De Uso

RV-245.book Seite 41 Freitag, 25. November 2005 4:25 16
PerfectView CRT245
7

Monitor description

No. in fig. 5, page 6 Description
Front
A
B
C
Rear
D
E
F
8

Proper use

The RV-245 rear view system is a video system primarily intended for use in caravans. It
enables the driver to observe the area directly behind the vehicle from the driver's seat,
for example, when parking.
9

Technical description

The RV-245 rear view system consists of the camera and a cathode ray tube monitor. The
system is activated when the driver selects reverse gear. The camera is attached to the
rear of the vehicle and transmits the image to the monitor on the dashboard via a cable.
You can select if the image is to be displayed with the real lateral image or the mirror
image. With the inverted display, the monitor acts as though you were looking in a rear-
view mirror.
10

Installing the monitor

Warning!
Select the location of the monitor so that it cannot injure anybody in the vehicle
under any circumstances (e.g. sudden braking, road traffic accidents).
Do not install the monitor in areas where you head may impact or in the area
that may be used by an airbag.
The monitor may not impair your vision when driving, see also fig. 6.A, page 7.
On/off switch
Contrast setting
Brightness setting
Power supply connection
Mirror dip switch
5 pin connection socket for camera (input)
Monitor description
41