Publicidad
Function • Descrizione del funzionamento
Fonctionnement • Descrição de funcionamento
1
4
3
10
2
english
Application aspects:
• The cartridge is designed for most
modern lubricants, if your system
creates a stable emulsion, contact
KAESER.
• The electronically level-controlled
ECO-DRAIN condensate drain
should be installed to ensure opti-
mum condensate discharge.
Condensate discharge by hand or by
means of a time-controlled solenoid
valve may lead to the formation of
stable emulsions or overloading of the
KCF unit.
• Maximum operating pressure of the
compressed-air system: 230 psi
The oil-contaminated condensate can be
discharged under pressure into the KCF
oil-water separator (maximum system
pressure 16 bar).
The overpressure is reduced in the pres-
sure-relief chamber (2) without creating
turbulence in the separation container.
The calmed condensate flows into the
filter stage where it passes slowly through
the cartridge (3).
First stage removes large oil drops and
dirt particles.
Second stage removes small oil drop-
lets.
Third stage removes residual mineral
hydrocarbons.
The clean water is discharged through
the outlet connection (4).
1 Condensate inlet
2 Pressure relief chamber
3 Cartridge
4 Water outlet
KCF 100
Publicidad
