Descargar Imprimir esta página

KAESER KCF 100 Instrucciones De Montaje página 16

Separar óleo de água
Ocultar thumbs Ver también para KCF 100:

Publicidad

Maintenance • Mantenimiento
Entretien • Manutenção
Prefilter
Adsorption filter
Prefiltro
Filtro de adsorción
Préfiltre
Filtre d'asorption
Filtro de
Filtro de absorção
entrada
1 x 3.2 gal
1 x 2.1 gal
(conical/cónico)
16
Operation • Servicio
Utilisation • Operação
Weight
Dimensiones
Peso
Medidas
Poids
Mesures
Peso
Dimensões
19.8 lbs
To ensure trouble-free operation, ob-
serve all the points listed under Main-
tenance:
The constituents of the compressor
condensate will depend on the specific
application.
It is part of the operator's duty of care to
take the necessary precautions, where
appropriate.
Note:
Order Ref.
Nº de referencia
• It is recommended that an original
No de commande
cartridge be kept in stock at all times.
N° de referência
• Only use cartridge to ensure operational
reliability. The original cartridges are
ANKCF100CART
identified by their labelling (C) and the
test seal.
• Do not use any other material. Oth-
erwise the correct functioning of the
KCF (waste water quality, through-put
capacity, service life) cannot be guar-
anteed.
• Remove plastic bag before cartridge
installation!
Procedure
1. Keep the plastic bag of the new car-
tridge for wrapping up the old one.
2. Shut off condensate inlet
3. Open KCF lid.
4. Lift cartridge and allow it to drain. Put
filter into the plastic bag and close bag
tightly.
5. Clean cartridge area.
6. Insert the new cartridge slowly and
ensure that the guide pins (A) fit into
the container holes (B).
7. Put back the lid.
8. Open condensate inlet.
9. Ensure correct disposal of the
fouled cartridge in the plastic bag
provided.
english
english
KCF 100

Publicidad

loading

Productos relacionados para KAESER KCF 100