Machine Description; Technical Characteristics - Corghi BRC1T-BR300 Manual De Uso

MACHINE DESCRIPTION

The BRC1T - BR300 is a cone-to-cone winder with grooved roller, driven cone and manual
loading. The characteristics, dimensions and weight are indicated in the section 'TECHNI-
CAL CHARACTERISTICS'.
Works with tailstocks on cones of any shape with stroke of 5", 6", 8" and 10" and taper of
0" (parallel) at 9° 15'.
Suitable for winding any type of spun yarn with continuous filament (cotton, acrylic, wool
and synthetic).
The BRC1T - BR300 is a modular machine. Each module may be single-side or double-
side with 5 or 6 heads on each side.
The version with 6-12 heads per module allows a maximum composition of 48 heads
(BRC1T) or 60 heads (BR300).
The version with 5-10 heads per module allows a maximum composition of 40 heads
(BRC1T) or 50 heads (BR300).

TECHNICAL CHARACTERISTICS

- Drive: 1 coaxial motor per head.
- Power requirements: 50/60 Hz.
• Three-phase 400-440 Vac up to 48 heads (BRC1T) or 60 heads (BR300).
• Other voltages available on request.
- Power absorption: 0.09 kW per motor 6".
- Power absorption: 0.13 kW per motor 8".
- Speed range: from 300 to 1200 metres/min per 6".
- Speed range: from 300 to 1000 metres/min per 8" and BR2.
- Speed adjustment: electronic with pushbutton control and digital readout.
- Cross over angle: standard 14° (other angles available on request).
- Traverse: 6" (152 mm).
- Traverse: 8" (200 mm).
- Package dimensions: max. 290 mm (11.4"). Cone head stops at diameter required.
- Winding:
• cylindrical 0°.
• truncated cones 3°30', 4°20', 5°57',9°15'.
- Slub catcher: 1 per head, mechanical with micrometric adjustment.
- Square hole waxer: 1 per head, rotating and counter-rotating controlled (BRC1T).
- Round hole waxer: 1 per rotating head, yarn driven (BR300).
- Self-cleaning yarn brake: 1 per head, with yarn guide pin after dyeing.
- Adjustable comb yarn tensioner (before dyeing).
- Yarn threading: automatic of waxer components.
- Machine composition:
• With a single control module.
MC/1 - min. 5 heads, max. 48 heads (BRC1T), max 60 heads (BR300).
MC/2 - min. 10 heads, max. 48 heads, max 60 heads (BR300).
• With two control modules, it is possible to create compositions of up to 96 heads on
a single axis (2x48) for 6 head versions, and up to 80 heads on a single axis (2x40) for
5 head versions (BRC1T).
• With two control modules, configurations of up to 120 heads on a single axis (2x60) are
User manual BR
UK
31