WARNING
Keep the work area clean
Do not clean the machine with compressed air or jets of water.
When cleaning the area take steps to avoid raising dust as far as possible.
INFORMATION REGARDING MACHINE
If the machine is to be scrapped, remove all electrical, electronic, plastic and metal parts and
dispose of them separately in accordance with current provisions as prescribed by law.
RECOMMENDED FIRE-EXTINGUISHING
When choosing the most suitable fire extinguisher consult the following table:
Dry materials
Water
Foam
Dry chemical
YES*
CO
YES*
2
SI* Can be used if more suitable equipment is not available, or for small fires.
WARNING
The indications in this table are of a general nature. They are designed as a guideline
for the user. The applications of each type of extinguisher will be illustrated fully by
the respective manufacturers on request.
Crossover angle
The angle at which the yarn is wound on the cone.
Counterweight
Adjustable weight, used to counterbalance the spindle.
Cording
Accumulation of yarn with the same pattern.
Braking
Disc device for increasing tension on yarn.
Waxing
Yarn lubrication using paraffin.
Cone-to-cone winding
Transferring the yarn from one cone to another.
Slub catching
Size-control of the yarn and of any irregular slubbing.
42
DEMOLITION
EQUIPMENT
Inflammable liquids
YES
YES
GLOSSARY
NO
YES
YES
YES
Electrical fires
NO
NO
YES
YES
User manual BR