Identifying The Product; Product Description; Control Panel - HURNER SPG 2.0 Manual De Instrucciones

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
2.8

Identifying the Product

Every product is identified by a name plate. It shows the model ("Typ"),
the serial number ("Seriennr."), and the manufacturer. The first two
digits of the serial number represent the year of manufacture.
3 Understanding the Product
3.1

Product Description

The SPG 2.0 is a data logger to generate reports for butt-welding
machines for plastics, which has basically three functions:
• Guiding the operator through the welding process;
• Monitoring all the relevant parameters during the welding pro-
cess;
• Generating a protocol to report the welding process.
The product can be used both with on-site and with in-shop machines
and it can in principle be connected to any welding machine. Upon
entering the type of plastic, the pipe diameter, and the wall thickness,
the unit calculates all the parameters that are critical for the welding
process, taking into account the selected welding machine. The entire
welding process is automatically saved to a report and can be exported
in different ways for purposes of analysis and further processing.
The required pipe jointing and traceability data can be entered using
the cursor keys (see first Info in Sect. 4.1), a RFID chip card or a bar
code scanner.
For various applications, the SPG 2.0 can be specifically configured in
the Configuration Menu (see section 4.2).
3.2

Control Panel

Version June 2018 HÜRNER SPG 2.0 User's Manual
Schweißprotokollier-Gerät
SPG 2.0
Seriennr. 14432901
Hürner Schweisstechnik
Nieder-Ohmener Str. 26
D - 35325 Mücke
Tel. +49 6401 9127 0
Display Screen
Reader for RFID Cards
MENU and Cursor Keys
Welding Process Diagram
START/SET and
STOP/RESET Keys
Support Bracket for
Installation to Butt-
welding Hydraulics
7
EN