Declaration Of Incorporation; Declaration Of Incorporation For Alpha Colonne With External Controller - Phoenic Mecano Alpha Colonne Instrucciones De Montaje

1.1 Declaration of Incorporation for Alpha Colonne with external
controller
As set out in Machinery Directive 2006/42/EC, Annex II, 1.B for partly completed machinery
The manufacturer
Phoenix Mecano Komponenten AG
Hofwisenstrasse 6
CH-8260 Stein am Rhein
confirms that the named product
Product designation:
Type designation:
Serial number:
Year of manufacture:
complies with the requirements for partially completed machinery according to
EC Machinery Directive 2006/42/EC.
The following basic requirements of Machinery Directive 2006/42/EC as set forth in Appendix I
are applied and fulfilled:
1.1.5.; 1.1.7.; 1.3.2.; 1.3.3.; 1.3.4.; 1.3.7.; 1.3.9.; 1.5.1.; 1.5.15.; 3.2.1.; 3.2.3.; 4.1.2.1.;
4.1.2.3.; 4.1.2.4.; 4.1.2.5.; 4.1.2.6. a); 4.1.2.6. b); 4.1.2.6. c); 4.1.2.6. d); 4.1.2.6. e); 4.2.1.;
4.2.1.4.; 4.3.1.; 4.3.2.; 4.3.3.; 4.4.1.; 4.4.2.
The manufacturer declares explicitly that the partially completed machinery meets all the relevant
provisions of the following EC directives:
2004/108/EU:2004-12-15
see type plate label
see type plate label
see type plate label
see type plate label
(Electromagnetic Compatibility) Directive 2004/108/EU of the European
Parliament and of the Council of 15th December 2004 on the approxima-
tion of the laws of the Member States relating to electromagnetic compa-
tibility and repealing Directive 89/336/EEC

1. Declaration of incorporation

37