BQS BNFIX BI 123 Manual De Uso página 17

Unlocking the ISOFIX anchors
To unlock the ISOFIX arms from the vehicle's anchors, press firmly the
(I)
release buttons
red. Pull back to remove the seat (fig. 3.7).
Adjusting the harness height
1. Press and hold the harness adjustment button
harness straps
2. Locate the harness straps connector
unclip the straps, freeingthem from the connector (fig. 3.9).
3. Remove the harness straps
(fig. 3.10).
4. Reinsert the straps
the straps are correctly hooked in the connector.
4. FASTENING THE CHILD IN THE SEAT. GROUP 1
NOTICE
Proper adjustment of the height of the harness ensures the child will be
seated correctly. The harness straps
of the child's shoulder or slightly above; never behind the child's back or
level with the ears (fig. 4.1).
1. Loosen the harness straps
harness adjustment button
2. Pressing the red button, release the buckle
3. Place the child in the seat.
4. Secure the child with the harness by joining the two parts of the clasp
and fasten the buckle until you hear a click (fig. 4.3 and 4.4).
5. Insert the clasps in the buckle until you hear a click that will indicate the
correct closing of the buckle (fig. 4.5 y 4.6).
6. Pull the harness adjustment strap
harness(fig. 4.7). Remember that in order to ensure the child's safety the
harnesses should fit tightly
7. To change the headrest
adjuster button
the button to fix the position (fig. 4.8).
To remove the child from the seat, loosen the harness straps
the chest part of the harness while pressing the harness adjustment button
(H)
(fig. 4.2) and press the red button to open the harness buckle
the child.
www.babyqs.com
on each arm until the indicator changes from green to
(D)
to loosen them (Fig. 3.8).
(D)
and insert them through the upper eyelets
(D)
in the harness connector
GROUP 1 only.
From 9 months to 4 years (9-18 kg)
(D)
by pulling them gently while pressing the
(H)
(fig. 4.2).
(A)
height, press and hold the headrest height
(M)
while selecting the optimal height for the child, release
(H)
(O)
on the back of the seat and
(O)
(D)
should be adjusted to the height
(E)
to help to install the child.
(G) to give the correct tension to the
while stretching the
.(fig. 3.11).Make sure
(D) by pulling
(E)
releasing
17