Kasanova MGG000002NOC Manual De Instrucciones página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

MILK FROTHER
9
purpose. The risk must be borne solely by the user.
3. This appliance is intended to be used in household and similar applications such
as:
- staff kitchen areas in shops, offices and other working environments;
- farm houses
- by clients in hotels, motels and other residential type environments;
- bed and breakfast - type environments.
4. This appliance complies with the standards in force for this type of product.
5. Make sure that the network voltage corresponds to 220-240V.
6. Place the product on a stable surface. Do not slot it in.
7. Always connect the appliance to an accessible power outlet.
8. When unplugging the power cord, always pull it at the plug; do not pull on the
cord.
9. Do not run the appliance with an empty jug.
10. Do not use the appliance without the lid being securely clipped in place.
11. Do not move the appliance whilst in use.
12. Always make sure there is sufficient ventilation around the appliance when it's in
use.
13. The jug body becomes hot during use, always use the handle provided.
14. Do not use the appliance outdoors.
15. Do not use the appliance :
if the plug or the power cord are damaged
if the appliance is in anyway damaged
if it fell down
16. Do not let the power cord hang over the edge of a table or the work surface and
make sure it does not come into contact with hot surfaces.
17. Do not place and do not use this product near by any heat source (hob, heating,
etc.).
18. Avoid wrapping the cord around the appliance and do not bend it.
19. Use only the accessories supplied with the appliance.
20. Never immerse the appliance, its power cord or its plug in water or any other
liquid.
21. Do not handle the cord or appliance with wet hands.
22. Make sure to unplug the unit when you do not use it.
23. This appliance is not a toy. Keep out of reach of children.
24. Do not leave the appliance unattended during operation.
25. If the product is damaged, it must be repaired by the manufacturer or by a third
person with similar qualification, in order to avoid all risks. This particularly applies to
replacing a damaged connection cable. Unqualified repairs can lead to considerable
danger for the user.
26. If the supply cord is damaged, it must be replaced by the manufacturer, its servi-
ce agent or similarly qualified persons in order to avoid a hazard.
27. Keep the appliance out of the reach of children when it is plugged in or cooling.

Publicidad

Tabla de contenido
loading

Tabla de contenido