Power Supply - Seca 874 Manual De Instrucciones Y Garantía

Power supply

The scale is powered exclusively by batteries.
The LC display has a low power consumption - 10,000 weighing operations can be per-
formed with one set of batteries. When the battery voltage is no longer adequate,
appears in the display. You need 6 type AA 1.5 V batteries.
– Carefully turn over the scale so that the
base is accessible.
– Press the closure of the battery compart-
ment in the direction of the cover itself and
open the battery compartment.
– Insert the supplied batteries into the bat-
tery compartment.
Check that the polarity is correct.
– Close the cover and then turn the scale
back up the right way.
– To activate the power supply, push the
switch in position "ON".
Model 874
bAtt
ON-OFF switch
13
GB