dirna Bergstrom bycool SPLIT Instrucciones De Montaje página 18

SPLIT
EN
CONDENSER
1 Position the condenser in the required place,
make the boreholes and secure with the
supplied screws.
1
2 Take the 3/8 piping through to the condenser.
Cut the 1/2 and 3/8 piping and secure H90
couplings with valve and M90º at the most
suitable measurement. Connect the cabling
with electros and pressure switch.
PIPING AND CABLE CONNECTION
1
The pipes and cabling should pass through the
most appropriate place in order to avoid any
sharp edges or twisting.
Clamps and screws are supplied to secure
the cables and piping; make sure these are
protected with edgebands and sleeves.
Be careful to discard the excess cabling in
an appropriate place.
SEE PIPING AND CABLE CONNECTION
DIAGRAMS.
1
18
Air conditioning for vehicles