Discs - Panasonic SC-PM46 Instrucciones De Funcionamiento

Discs

Basic play Basic play
CD MP3
Press [y] to turn the unit on.
1
Press [0] to open the disc tray and then load the disc.
2
Press [0] again to close the tray.
Label must
face upward
Disc tray
Press [CD 6] to start play.
3
4 Adjust the volume.
To Action
Press [CLEAR 7].
stop the disc
Press [CD 6].
pause play
Press again to resume play.
skip tracks Press [ /REW/4] or [ /FF/¢].
search through Press and hold [ /REW/4] or [ /FF/¢]
tracks during play or pause.
CD
skip album Press [ALBUM
Press [ALBUM
MP3
numeric buttons in the stop mode.
Play Mode function
CD MP3
Press [CD 6].
1
Press [PLAY MODE] to select the desired mode.
2
Mode
1-TRACK
1TR
1-ALBUM
1ALBUM
MP3
RANDOM
RND
1-ALBUM RANDOM
1ALBUM RND
MP3
Note
• During RANDOM or 1-ALBUM RANDOM play, you cannot skip to
tracks that have been played.
• The current play mode is cleared when you open the disc tray.
CD
• During RANDOM play, you can search backward or forward only
within the current track.
Display function
This function allows you to display the information of the current
track.
Press [DISPLAY] repeatedly during play or pause mode.
CD
Elapsed play time
MP3
Elapsed time
ID3 (Artist)
Note
• Maximum number of displayable characters: approximately 30
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
8 supported will not be displayed.
• ID3 is a tag embedded in MP3 tracks to provide information about
8 the track.
or ] in the play mode.
or ] once and then the
To play
one selected track on the disc.
Press the numeric buttons to select the
track.
one selected album on the disc.
Press [ALBUM or ] to select the
album.
a disc randomly.
all tracks in one selected album randomly.
Press [ALBUM or ] to select the
album.
Remaining play time
Album name Track name
ID3 (Track) ID3 (Album)
Advanced play Advanced play
Repeat play
You can repeat program play or other selected play mode.
CD MP3
Press [REPEAT] before or during play.
"REPEAT ON" and " " are displayed.
To cancel
Press [REPEAT] again.
"REPEAT OFF" is displayed and "
Program play
This function allows you to program up to 24 tracks.
CD
Press [CD 6] and then [CLEAR 7].
1
Press [PROGRAM].
2
Press the numeric buttons to select your desired track.
3
Repeat this step to program other tracks.
Press [CD 6] to start play.
4
MP3
Press [CD 6] and then [CLEAR 7].
1
2 Press [PROGRAM].
3 Press [ALBUM or ] to select your desired album.
4 Press [ /FF/¢] once and then the numeric buttons to
select your desired track.
Press [ENTER].
5
Repeat steps 3 to 5 to program other tracks.
Press [CD 6] to start play.
6
For two-digit track, press [h10] once then the two digit.
For three-digit track, press [h10] twice then the three digit.
To Action
cancel program mode Press [PROGRAM] in the stop mode.
Press [PROGRAM] then [CD 6].
replay the program
check program Press [ /REW/4] or [ /FF/¢] when
contents
"PGM" is displayed in the stop mode.
To check while programming, press
[PROGRAM] twice after "PGM" appears,
then press [ /REW/4] or [ /FF/¢].
add to the program
CD
Repeat step 3 in the stop mode.
MP3
Repeat steps 3 to 5 in the stop mode.
clear the last track Press [DEL] in the stop mode.
Press [CLEAR 7] in the stop mode.
clear all programmed
tracks "CLR ALL" is displayed. Within 5 seconds,
press the button again to clear all tracks.
Note
• When you try to program more than 24 tracks "PGM FULL" appears.
• The program memory is cleared when you open the disc tray.
CD
• During program play, you can search backward or forward only
within the current track.
" is cleared.