Before Use - SOLAC AE2501 Instrucciones De Uso

socket on the appliance. The socket is located
at the lower part of the handle where you can
find the battery. (Fig. 1)
- The pilot light will come on to indicate that the
charger is charging the battery.
- When the battery is charged disconnect the
charger from the mains supply.
- NB: Do not use the appliance while it is con-
nected to the charger.
HOW TO CHECK THE BATTERY'S CHARGE
LEVEL:
- Turn on the vacuum cleaner with the ON / OFF
button during 1 second.
- If no pilot light lights up, this means that the
battery is completely flat.
- NB: For a long battery life, it is advisable to
charge the battery, only, when it has run out
completely.
INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that product's packaging has been
removed.
- Before using this product for the first time, it is
important to make a full charge of batteries.
- Prepare the appliance according to the function
you wish to use:
USE:
- Turn the appliance on, by using the on/off
button during 1 second.
- The pilot light comes on.
- To select the TURBO speed press twice on the
ON / OFF button
- IMPORTANT: To turn the appliance on, press
the ON / OFF button for 1 second.
FITTING AN ACCESSORY TO THE HAND
VACUUM OR TO THE ALUMINIUM EXTENSION
TUBE:
- The hand vacuum is designed in such a way
that it allows the following accessories to be
fitted: (use the combination that best meets
your requirements). (Fig.2).
- Brush nozzle: equipped with a brush on its tip
that allows brushing the surface while acting.
- Nozzle 2 in 1 lance / brush: Especially indicat-
ed for slots and corners of difficult access.
- Motorized brush: You can use any type of sur-
face: parquet, tiles, carpets and carpets.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance by pressing the ON / OFF
button twice if you are using the vacuum clean-
er at ECO speed or once if you are using the
vacuum cleaner at TURBO speed.
- Remove the battery from the appliance if you
are not intending to use the appliance during
an extended period.
- Clean the appliance.
CLEANING
- Disconnect the battery charger from the mains
and allow it to cool before undertaking any
cleaning task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
EMPTYING THE DUST BOX
- Empty the dust box when it is full (observation
facilitated by transparent windows), or when
vacuuming power is notably reduced.
- Open the lid of the dust box and empty the
contents into the appropriate waste disposal
receptacle. (Fig.3)
- Check the condition of the cyclone.
- Close the lid of the dust box.
CHANGING THE FILTERS:
- Dust tank HEPA filter (high efficiency air filter
that efficiently retains spores, ash, sawdust,
pollen...), it is advisable to change it a least
once a year or after every 50 hours of use, or if
its potency diminishes remarkably.
- Air outlet filter, it is advisable to be changed
at least once a year or every 100 hours of the
appliance's use.
TO REMOVE THE FILTERS:
- Turn the lower part of the tank clockwise and
pull outwards. (Fig.4)
- Remove the cyclone located inside the tank by