Cannot turn on the camera.
•
Install the batteries correctly (page 9).
Properly connect the AC Adaptor (not supplied).
•
The batteries are discharged. Install new batteries or charged Nickel-Metal Hydride batteries
•
(page 9).
The batteries are dead. Replace them with new ones.
•
The power turns off suddenly.
If you do not operate the camera for about three minutes while the power is on, the camera
•
turns off automatically to prevent wearing down the batteries. Turn on the camera again
(page 11).
The batteries are discharged. Install new batteries or charged Nickel-Metal Hydride batteries
•
(page 9).
Shooting still images/movies
Your camera cannot record images.
Check the free capacity of the internal memory or "Memory Stick Duo" (pages 25, 26). If it is
•
full, do one of the following:
Delete unnecessary images (page 15).
–
Change the "Memory Stick Duo".
–
You are using the "Memory Stick Duo" with the write-protect switch, and the switch is set to
•
the LOCK position. Set the switch to the recording position.
You cannot record images while charging the flash.
•
•
Set the mode dial to
Set the mode dial to
•
Cannot insert dates on images.
This camera does not have a feature for superimposing dates on images. You can print or save
•
images with the date inserted using "Picture Motion Browser".
Viewing images
Your camera cannot play back images.
Press
•
The folder/file name has been changed on your computer.
•
When an image file has been processed by a computer or when the image file was recorded
•
using a model other than that of your camera, playback on your camera is not guaranteed.
The camera is in USB mode. Delete the USB connection.
•
28
,
,
when shooting movies.
(Playback) button (page 15).
,
,
,
,
,
or
when shooting still images.