CLEANING AND MAINTENANCE
l Touch MENU again. The display will
flash Pdur.
88 08
l Touch > or < sensors to select the Dura-
tion.
You can select 2.00 (2 hours, 120 mi-
nutes), 2.30 (2.5 hours, 150 minutes) or
3.00 (3 hours, 180 minutes). Once you
have made your choice wait for the aco-
ustic signal which confirms that Duration
has been set.
l Pyrolytic cleaning process will start.
Oven door will be locked.
l "P0.00" is shown on the display when
the pyrolytic cleaning is complete.
80 00
l The doors will be unlocked automatically
when the oven chamber cools down.
When the temperature inside the oven
chamber cools down to 160°C, the door
is unlocked and the door lock indicator
light goes out.
l When door lock indicator light is off, set
the function selector knob in position 0.
l When the door is unlocked and you turn
off the oven, you can open the door and
remove ash with a soft, damp cloth. Re-
place the side rail and other accessories.
Your oven is ready for use.
Important!
When you start the pyrolytic cleaning pro-
cess and inadvertently open the oven door,
the process will stop and door lock indica-
tor will be flashing. To restart the pyrolytic
cleaning turn the selector knob to 0and re-
enter the desired settings.
Cancel the process
Pyrolytic cleaning is an automatic process
that should not be interrupted.
If you need to stop the process, turn the
selector knob to position 0.
Depending on the time when you interrupt the
process (temperature in the oven chamber)
the oven chamber will need to first cool down
to 160°C before the door is unlocked.
Open the door in emergency
If for some reason the door is not unlocked
automatically, and the oven chamber has al-
ready cooled down, open the door as follows:
l set the function selector knob in position
"Lighting",
l wait for 4 minutes;
l set the function selector knob in position
0 – the oven door should unlock within 10
minutes.
Note. The door will not unlock if the
temperature inside the oven chamber is
above 160°C.
51