Electrical Connections; Data Plate - Electrolux E24 WC 160 ES1 Manual De Instrucciones

Thank you for choosing an Electrolux Wine Cellar !
Operating and Installation
Instructions for your Electrolux
Wine Cellar
Introduction
Thank you for choosing the Electrolux Wine Cellar.
Please read the following instructions carefully before
installing your new wine cellar. We trust you will be
completely satisfied with your purchase.
The wine cellar must be installed and used according to
these instructions in order for it to operate correctly and
economically.

Electrical connections

Your winecellar operates on a single phase alternating
current.(AC) Please check that the voltage shown on
the serial plate corresponds to your power supply.
All wine cellars require a connection to an electrical
power source. Improper hook-up can result in a safety
hazard and potential damage to the product of con-
tents! Proper installation, in accordance with the
manufacturer´s specifications and all local codes, is
the sole responsibility of the consumer. The manufac-
turer is not responsible for any installation expenses or
damages incurred due to improper installation. If you
are insure of your ability to safely connect electric
power to the unit, consult a licensed and insured
professional to perform all electrical work.
WARNING – THE WINE CELLAR
MUST BE GROUNDED.
Electrical leads must be routed and secured so
that they cannot come into contact with hot or
sharp parts of the wine cellar.
Accessories
Please check that the following accessories are
attached to the wine Cellar or in the separate
cardboard box for accessories which is placed inside
the wine cellar.
At the back:
1. Distance bar (to ensure distance to wall behind)
Accessories box:
1. Instruction manual
2. Handle + Socket head screwdriver ( 2 mm )
3. Drip tray
4. Shelf support
5. Storage shelf
6. Wooden bar (Installation see page 19)
Necessary additional tools not incuded
1. Screwdriver (star quad )
2. Adjustable wrench

Data plate

Check the data plate, inside the wine cellar at the top
left, to ensure you have received the right model.
The data plate shows details that you will need to
quote if you have to contact service personnel. It is a
good idea to make a note of them here.
Model Number ...........................................
Serial number ...........................................
Purchase date ..............................................
Shipping damage
Inspect the wine cellar for shipping damage. You must
report any damage to the company responsible for the
delivery within the legal or stated time for this type of
product. If there is no such established report time, the
damage must be reported within seven days of
delivery.
Questions ?
For toll-free telephone support in the U.S. and Canada:
1-877-4ELECTROLUX ( 1-877-435-3287 )
For online support and internet product information:
www.electroluxusa.com
1
5
2
1
3
6
4
3