Machine Space Limits; Positioning; Disposal Of Packing; Electrical Connection - Electrolux WC170BKMZ Instrucciones De Instalación, Uso Y Mantenimiento

Machine space limits

A suitable space must be left around the machine (for opera-
tions, maintenance, etc.). This space must be increased in case
of use and/or transfer of other equipment and/or means or if
exit routes are necessary inside the workplace. For information
regarding distances from any other machines present in the
room (in fact, close proximity can create problems of conden-
sate forming on the walls of the appliance), also taking into
consideration the space needed for door opening.

Positioning

Disposal of packing

The packing must be disposed of in compliance with the cur-
rent regulations in the country where the appliance is used.
All the packing materials are environmentally friendly. They can
be safely kept, recycled or burned in an appropriate waste in-
cineration plant. Recyclable plastic parts are marked as follows:
polyethylene:
PE
polypropylene:
PP
polystyrene foam: corner protectors
PS
The parts in wood and cardboard can be disposed of, re-
specting the current regulations in the country where the
machine is used.
ATTENTION
Keep ventilation openings
in the appliance´s cabinet
or in the built in structure
clear of obstruction.
34
outer wrapping,
instructions bag
straps

Electrical connection

Wiring and connections in power supply systems must been all
applicable (local and national) electrical codes. Consult these
codes lengths and sizes prior to cabinet installation.
This device complies with relevant EU directives including
Low Voltage Directive 2014/35/EU and Electromagnetic
Compatibility Directive 2014/30/EU.
The socket should be freely accessible.
Connect the appliance only to 220/240 V / 50Hz alternating
current via a correctly installed earthed socket.
The socket must be fused with a 10-13 A fuse.
If the appliance is to be operated in a non-European country,
check on the rating plate whether the indicated voltage and
current type correspond to the values of your mains supply.
Information regarding voltage, current or power are
given on the rating plate.
The power cord may be replaced by a technician only.
The rating plate provides various technical information as well
as type and serial number.
ATTENTION
If the power cable is dam-
aged it must be replaced
by the After-Sales Service
or in any case by qualified
personnel, in order prevent
any risk.
Connection to the power supply must be carried out in
compliance with the regulations and provisions in force in
the country of use.
ATTENTION
Work on the electrical sys-
tems must only be carried
out by a qualified electri-
cian.
To connect 220/240 V / 50Hz alternating current via a correctly
installed earthed socket.