Installation; Electrical Connection - Electrolux ERW3313AOX Manual De Instrucciones

Ocultar thumbs Ver también para ERW3313AOX:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5.2 Closing the door
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to

"Installation".

6. INSTALLATION
6.1 Positioning
WARNING!
If you are discarding an old appli-
ance that has a lock or catch on
the door, you must ensure that it
is made unusable to prevent
young children being trapped in-
side.
The appliance shall have the plug
accessible after installation.
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
At the same time, free the
middle hook and slide off
the cover in the direction of
the arrows.
Replace the bulb with an
original spare part.
Install the lamp cover.
Connect the mains plug to
the mains socket.
Open the door. Make sure
that the lamp comes on.
3.
If necessary, replace the defective
door gaskets. Contact the Service
Center.
Cli-
Ambient temperature
mate
class
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C

6.2 Electrical connection

Before plugging in, ensure that the volt-
age and frequency shown on the rating
plate correspond to your domestic power
supply.
The appliance must be earthed. The pow-
er supply cable plug is provided with a
contact for this purpose. If the domestic
ENGLISH
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Erw3313box

Tabla de contenido