Encoding Of Cd/Phono Into Mp3 File - Roadstar HIF-1893TUMPK Manual De Instrucciones

3.Select a desired track by pressing skip or buttons (3).
4.Press the " PLAY MODE " button to store the trace into memory.
5.Repeat steps 3 and 4 to enter additional tracks into the memory if neces-
sary.
6.When all the desired tracks have been programmed, press cd " play/
pause (2) to play the disc in assigned order.
7.To cancel the programmed file, press "stop" button.
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA
The system is able to decode and playback all mp3 /wma file which stored
in the memory media with usb connecting port.
1.Set function selector (15) at cd/usb mode and then press FUNCTION
button (6) to select usb.
2.Plug-in the usb plug with the face up & make sure it going into complete-
ly.
3.The system will start reading the storage media automatically after con-
necting, and lcd display (18) will show the total number of mp3/wma files
4.Repeat the same playback procedure as playing cd/mp3 disc as above.
REMARKS:
The system can detect and read the file under mp3 and wma format only

though the usb port.
If connect the system to mp3 player via the usb socket, due to variances in

mp3 encoding format, some mp3 player may not be able to play via the
usb socket. this is not a maul-function of the system.
Connecting the usb upside down or backwards could damage the audio

system or the storage media (usb thumb drive). Check to be sure the direc-
tion is correct before connection.
LISTENING TO TAPE
1.Set the Function button (6) to " TAPE " mode. The system will start play-
back automatically after inserting the cassette tape.
2.Press " TAPE FORWARD / EJECT " Button (33) half inwards during play-
back mode. The tape will wind forward.
3.Slightly press the " TAPE FORWARD / EJECT " Button (33) again to re-
sume playback.
4.Press the" TAPE FORWARD / EJECT " Button (33) completely inwards
and the cassette tape will be ejected through the cassette door cover (34).

ENCODING OF CD/PHONO INTO MP3 FILE

English 6