Removing Of Usb / Memory Card - Roadstar HIF-1893TUMPK Manual De Instrucciones

6.After finish of recoding, press the STOP button to stop recording.
CASSETTE ENCODING
1.Insert the USB device.
2.Press the function button to "TAPE".
3.Start playback at TAPE for the track which you want to record to USB.
4.Press the RECORD button two times to start encoding.
5.The display show REC.
6.After finish of recoding, press the STOP button to stop recording.

REMOVING OF USB / MEMORY CARD

To remove the usb, turn off the power or switch the function mode to either
cd, aux or tuner first. Un-plug it by pulling out the usb socket directly.
DELETE TRACKS FROM USB
1.Insert the USB device.
2.Press the function button to "CD/USB ".
3.Press the button FUNCTION to select USB device.
4.During playback or STOP condition, press the button DELETE from Re-
mote Control to delete the current track.
SPECIFICATIONS
AC:
FM:
MW:
Design and specifications are subject to change without notice.
110-240V ~ 50Hz
87.5 - 108MHz
520 - 1620kHz
English 8