Phono Encoding - Roadstar HIF-1893TUMPK Manual De Instrucciones

7 English
The system is able to encode normal cd, cassette or turntable to mp3 for-
mat and recording at memory media with usb connecting port.
CD ENCODING
Encoding 1 track:
1.Perform normal playback of the cd track you want to encode & record,
2.Press " record " button (9) twice during the playback of the desire track,
unit will display. Encoding is performing now.
3.Press the STOP button to finish recording the track.
Encoding 1 disc:
1.Place a cd with the printed side facing up inside the tray & then close the
co door
2.Press the RECORD button (9) twice after focus search completed. unit
will display "REC". Encoding is performing now.
3.After completing of encoding, unit will stop playback automatically.
Remarks:
The recording speed is 1:1 and according to the actual plying time of the

cd track.
The system will creat a " RECORD " folder and then store the encoding

track in it.
The recording format is preset at – mp3 bit rate: 128 kbps, sampling rate:

44.1khz.
No song title will be recorded during encoding mode.

To interrupt the recroding, press the " record " button again during record

mode.
Recording will be completed only entire song being encoded, if terminate

the encoding process intermediately, there is no track being recorded nor
stored to the usb.
Copying of MP3/WMA file
If putting a mp3/wma disc instead of a cd-disc, the system will copy the fi-
les to the usb or sd card if press the " record " button (9). The operation
procedures is same as cd encoding as stipulate on above, and the system
will switch to copying mode only if mp3/wma file being read.

PHONO ENCODING

1.Insert the USB device.
2.Press the function button to " phono ".
3.Start playback at phono for the track which you want to record to usb.
4.Press the RECORD button two times to start encoding.
5.The display show REC.