Set Your Washing Program - Zanussi ZWG1121 P Manual De Instrucciones

Set your washing program

Program selector dial
Temperature selector dial
12
Turn the program selector dial to the required program. The
green Start/Pause (
The selector dial is divided into following sections:
(Cancelling/Off)
(Cottons)
(Cottons Prewash)
(Cottons Economy)
(Synthetics)
(Mixed Fabric)
(Delicates)
(Wool/Handwash)
* for more programs information see page 17.
The selector dial can be turned either clockwise or
anticlockwise. Position "O" to Reset program/Switching
OFF the machine.
At the end of the program the selector dial must be
turned to position "O", to switch the machine off.
Attention!
If you turn the program selector dial to another program
when the machine is working, the red Start/Pause (
light will flash 3 times to indicate a wrong selection. The
machine will not perform the new selected program.
Cancelling a program
Turn the selector dial to "O" to cancel a program which is
running. Now you can select a new program.
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
washing machine.
By selecting position
cold water.
If a temperature is chosen that is not allowed with the
selected program, the red pilot light of the Start/pause
( ) button will flash 3 times.
) light starts to flash.
(Rinse)
(Drain)
(Spin)
(Easy Iron)
(5 Shirts)
(Mini 30)
(Jeans)
(cold) the machine will wash with
) pilot