Peaq PDR260-B Manual De Instrucciones página 44

ENGLISH
SETTING THE SLEEP-TIMER
After a pre-selected amount of time, this
unit can automatically change to standby
mode.
1. Select menu option [Inactive Stand-
by] with VOLUME/SELECT/SNOOZE
and confirm with SELECT.
2. Use
tions:
• [Off]
• [2 hours]
• [4 hours]
• [5 hours]
• [6 hours]
LANGUAGE
1. Press MENU and enter System set-
tings to select the submenu LAN-
GUAGE.
2. Select a language.
FACTORY SETTINGS
Select menu option [Factory reset] with
VOLUME/SELECT/SNOOZE and confirm
with SELECT.
SOFTWARE UPDATE
You can search software updates with
the product. Once you have accepted the
conditions for use, the download and in-
stallation procedure for the new software
updates begins automatically.
Note
Make sure that the product is connected
to the Internet.
SOFTWARE UPGRADE
Installation of the new Software-Updates.
44
_PDR260_171222_A_V06_HR.indb 44
/ to select the desired op-
SETUP WIZARD
Press MENU and enter System settings to
select the submenu SETUP WIZARD. You
can set up all settings important for bring-
ing radio into operation.
INFO
Here you can find the version number of
the currently used software.
BACKLIGHT
Here you can set the backlight illumination.
SETTING THE ALARM TIME
Make sure the clock shows the correct
time.
1. Press ALARM button to choose fol-
lowing options:
• [Alarm 1]
• [Alarm 2]
2. Press SELECT to access the Alarm
Wizard.
Activate alarm
1. Choose Alarm 1 or Alarm 2.
2. Enable: Off, Daily, Once, Weekends,
Weekdays (Mon-Fri.).
Enable
Select how the alarm clock should be
switched on:
• Select off to deactivate the alarm.
• Select daily, once, weekend or week
days to activate the alarm.
Time
Set the time at which the alarm should be
set.
22/12/17 12:37 pm