Usb Playback - Peaq PDR260-B Manual De Instrucciones

Mode
Select the mode for the alarm clock here:
• Buzzer: Wake up with alarm tone
• Internet Radio: Wake up with Internet
radio
• DAB: Wake up with DAB-Radio
• FM: Wake up with FM-Radio
Note: In radio mode, the last station you
listened is automatically selected, unless
you save a new station.
• Preset: Select the station you want to
activate with the radio mode.
Note:
• This menu is only available under radio
modes.
• The last listened station is set as default,
unless you select a new station.
Volume
Here you can set the volume with which
the alarm clock will be switched on.
Save
Save the alarm setting.
Note
During alarm you can change the snooze
period by repeatedly pressing on the
SNOOZE button on the remote control.
SWITCHING OFF THE ALARM TONE
Once the alarm sounds, press POWER
button and the alarm is switched off.
SETTING THE SLEEP-TIMERS
Select Sleep in the main menu or press
SLEEP button repeatedly on the remote
control.
_PDR260_171222_A_V06_HR.indb 45
Press SLEEP to select a period of time:
• [OFF]
• [15 MIN]
• [30 MIN]
• [45 MIN]
• [60 MIN]
If the sleep timer is not pre-selected, the
default setting is OFF.

USB Playback

1. Insert an USB Stick with MP3/WMA/
AAC music files.
2. Press MODE and select Music player.
3. Select USB playback.
4. Playback starts automatically and the
first track will be played. If there is no
USB device connected, the message
NO USB device found will be dis-
played on the screen.
Note
Connect the USB device directly to the
USB port of the unit. Using an extension
cable is not recommended and may cause
interference and failure of data transfer.
This product supports USB 1.1 and 2.0 up
to 32GB with file system FAT16 and FAT32.
ENGLISH
45
22/12/17 12:37 pm