Operation Adjustments; Safety Instructions; Placing The Tabletop In Horizontal Position - Steelcase Verb Fliptop Instrucciones De Uso

_______________________________________________________________
5 Operation
adjustments

5.1 Safety instructions

The Verb FlipTop conference table / training room
table may only be used and operated when in a
technically perfect condition and in compliance with
the operating manual.
Before you attach the desk paraphernalia on the
accessories:
Ensure that the Verb FlipTop conference table
■
/ training room table has been assembled in
accordance with the provided assembly
instructions.
Ensure that the maximum permissible load-
■
bearing capacity of the conference table and of
the accessories is not exceeded.
Danger due to voltage!
The metal parts of the desk can become
energised if live cables and connections are
damaged.
Do not earth electrical

devices on the desk frame!
Injury and damage possible!
The fastening screws could tear out when
lifting the conference table at the tabletop
or at the attached components.
Always take hold of the conference

table / training room table at the
underframe to transport or move it.
Risk of falling!
Do not use the conference table /

training room table as a climbing aid.
129117

Operation adjustments

5.2 Placing the tabletop in
horizontal position
Risk of physical injury!
A rolling-away conference table / training
room table with an unlocked tabletop can
cause physical injury.
Lock all casters in place before

engaging the lever.
Figure 5-1: Work surface can be flipped either way
The tabletop of the Verb FlipTop conference table
/ training room table can be brought to the
EN
9