Transport And Storage; Safety Instructions; Interim Storage; Checking The Delivery Contents - Steelcase Verb Fliptop Instrucciones De Uso

_______________________________________________________________
4

Transport and storage

4.1 Safety instructions

Risk of injury and damage!
The fastening screws could tear out when
lifting the conference table at the tabletop
or at the attached components.
Always take hold of the conference

table / training room table at the
underframe to transport or move it.
Risk of damage to conference table /
training room table!
If a combination of conference tables has to
be dismantled, e.g., for reasons of
transport:
Refer to the separate assembly

instructions.

4.2 Interim storage

If the conference table / training room table has to
be temporarily stored before installation, the
following conditions should be fulfilled:
Undamaged transport packaging
■
Sufficient load-bearing capacity of the floor
■
Dry floor
■
Level floor surface
■
Temperature range +5 °C to +40 °C
■
Max. rel. humidity: 80 %
■
4.3 Checking the delivery
contents
After unpacking, check the product immediately for
transport damage and completeness; if applicable,
inform the manufacturer as soon as possible of any
damage.
129117
Transport and storage
4.4 Disposing of the packaging
material
The packaging includes the following:
Outer packaging made of cardboard
■
Bubble wrap made of polyethylene (PE)
■
Edge protectors made of cardboard or
■
polyethylene (PE)
Corner protectors made of polyethylene (PE)
■
These materials are recyclable. If installed by
Steelcase or an installer authorised by Steelcase,
the manufacturer will dispose of the packaging. If
you assemble the product yourself, correctly sort
and separate the packaging materials and return
the materials to the recycling process.

4.5 Assembling Verb FlipTop

Risk of tripping and impact!
Components and attachments of
conference tables that protrude into traffic
routes can result in physical injury.
 Keep a sufficient safety distance to
other furniture when setting up the
conference table / training room table.
Fit attachments of the conference

table so that they do not protrude into
traffic routes.
Injury and damage possible!
The fastening screws could tear out when
lifting the conference table at the tabletop
or at the attached components.
Always take hold of the conference

table / training room table at the
underframe to transport or move it.
Please follow the attached assembly instructions for
assembling the Verb FlipTop conference table /
training room table.
Steelcase recommends installation by a
specialist dealer or an assembly company.
EN
7